Weather in Flint
| Today | Friday | Saturday |
|---|---|---|
 Partly Cloudy 13°/9° |
 Chance of Rain 10°/3° |
 Clear 10°/4° |
IMS 100 3D Sensor
Published November 4, 2011The IMS 100 Door Sensor utilises the latest “Time Of Flight” camera technology to monitor the entrance area of a lift.
Easily fitted within the lift car entrance and used with the Cedes Max74 range or other existing 2D door detectors or single beam sensors that utilise standard contact basic signalling.
Heavy Duty Doors Robusta
Published January 20, 2011
A long awaited product to enhance our door range for Heavy Duty / Local Authority.
The Robusta is available as a complete Car & Landing System
In addition it can be used with just tracks, closers, locks & hangers with an option of adding frames, headers, door panels and full depth architraves.
Using the latest Fermator VVVF system with permanent magnet motor, we can offer the latest in door technology together with incorporating the heavy duty mechanical requirements of many
Industry specifications.
- Vandal Resistant ROBUSTA Model available
- Heavy duty track profile
- Suitable for modernisation of existing GAL doors
- Large hanger rollers & tyred upthrust rollers
- Track cleaning brush
- Dimensionally compatible with other Industry Standards
- Robust Lock
- Increased belt dimension
- Available with air-cord system or mechanical door linkage
- Gravity weight closer for consistent closing forces
- Option for car door zone locking
- Ultra slim operator with permanent magnet motor
- All operator mechanisms and equipment within the width of the door panels
- Simple front mounting on the car
- Centre parting models available with single or double clutch arrangement
- Available as complete entrance with door panels & frame in a variety of finishes
» Back to previous page
Slim Doors – Symmetric & Asymmetric
Published January 20, 2011
Competitive and Compact Modernisation Solution For Restricted Shaft Depths With Power Operated Sliding Doors …
Slim Sill Sections:Two Panel Centre Parting: Reduced from 54mm to 30mm Two Panel Side Opening: Reduced from 90mm to 60mm Four Panel Centre Opening: Reduced from 90mm to 60mm Three Panel Side Opening: Reduced from 135mm to 90mm
|
 |
For a copy of the latest Fermator Technical Catalogue please contact the sales office alternatively click on Fermator’s concise website www.fermator.com
Technical Documents:
 |
SLIM DOORS |
» Back to previous page
LB Folding Doors
Published January 19, 2011Replacement Automatic Folding Door Solution For Heavy Manual Hinged Landing Doors …
- Space saving on landings
- Eliminates the need for heavy manual hinged landing doors.
- Wide range of clear openings, 550mm to 1100mm
- VVVF Control for smooth opening & closing
- New permanent magnet motor giving 95% efficiency
- Compatible with any existing operating voltage 12-240V AC/DC
- Supply 240v single phase
- Supplied complete with door post & header for easy Interfacing to existing openings
- Obstruction detection when closing meets the requirements of EN81-1/2
- Large range of finishes available
For a copy of the latest Fermator Technical Catalogue please contact the sales office alternatively click on Fermator’s concise website www.fermator.com
Technical Documents:
LB linear folding landing doors
» Back to previous page
Schindler QKS Conversions
Published January 18, 2011SCHINDLER Equipment QKS 8, QKS9, QKS11 & Varidor 10.
Produced at the Original French Schindler Factory, owned by Fermator.
Operators are supplied with either interface adapter kits to enable the re-use of the existing door panels or with new door panels (with or without new sills).
- Choice of renovation level, total or partial.
- No prior work required to the car fronts
- Existing car fronts and header preserved
- Overall dimensions similar to the original operator
- Total compatibility with existing landing doors
- Lift returned to service in 48 hours or less
- Latest generation of VVVF
- Drive through linear belt
- Fewer moving parts
- Fewer electrical contacts
|
Technical Documents:
|
 |
» Back to previous page
3D Door Detector
Published January 17, 2011
Cedes 3D Door Protection System – The IMS 100The IMS 100 Door Sensor utilises the latest “Time Of Flight” camera technology to monitor the entrance area of a lift. Easily fitted within the lift car entrance and used with the Cedes Max74 range or other existing 2D door detectors or single beam sensors that utilise standard contact basic signalling. |
 |
The IMS 100 Kit includes Flush & Surface Mounting options.
The IMS100 has proven by maintenance companies to improve the safety and performance of lifts in particular when it comes to reducing elevator door damage in cargo or bed lift installations. This means major savings in repairs and out of service times for their customers.
How it Works
|
When lift doors open, the IMS 100 instantly acquires an image of the area in front of the lift entrance and compares to reference images, detecting persons or objects moving in the field by reference technology. False triggers that occur with other 3D Protection devices are avoided as stationary objects or persons at the landing entrance will be detected but ignored. TECHNICAL
|
|
|
IMS 100 Manual |
Please contact us for further information.
» Back to previous page
New Governor
Published January 16, 2011|
Part Numbers: RQ200, RQ250, RQ300,
Options:
|
 |
|
RQ Governer |
Please contact us for a quote
» Back to previous page
Pit Mounted Tension Weights
Published January 15, 2011Montanari Tension Weights
|
Floor Mounted Models TEV TENSION WEIGHT
Options:
|
 |
|
TEV 300 BD TENSION WEIGHT |
|
TEV 200 BD TENSION WEIGHT |
|
TEV 300 DOWN TENSION WEIGHT |
|
TEV 200 DOWN TENSION WEIGHT |
Please contact us for a quote
» Back to previous page